Bin full: When the wastebasket is full, the Red LED light will indicate it needs to be
emptied. While lit, the shredder will not operate until the wastebasket is cleared.
Feed Error: The Red LED light indicates the paper in the paper tray cannot be grabbed
by the feeders, open the lid to make sure the papers are unfolded and positioned
properly.
Features:
• Auto-Reverse Technology: When the shredder detects over-capacity shredding, the motor will
immediately stop and reject paper before actual shredding begins.
• Energy-Saving Auto Power Sleep: This setting turns off all features of the shredder. For
safety reasons, we recommend that you leave shredder in the "OFF" position whenever it is
unattended or not in use.
Auto Feed Shredding Operation
Auto Feed Shredding Capacity:
Shreds:
• Maximum 150 sheets of letter size (8-1/2" x 11") 20 lb bond paper per load.
• Up to 20 sheets of stapled paper stacks.
• Up to 20 sheets of clipped paper stacks.
Power on shredder:
Plug into grounded standard
US household power outlet
(120 V~).
8
Put main power switch in
ON (I) position.
Turn power on.