Caring For And Cleaning Your Appliance; Changing And Cleaning The Anti-Grease Filters; Installing The Carbon Fi Lter; Changing The Light Bulb - Brandt AD1579B Manual De Utilización

EN

4 / CARING FOR AND CLEANING YOUR APPLIANCE

• CHANGING AND CLEANING THE ANTI-GREASE FILTERS

— Tear down your cooker hood as per the
approach shown on Pic. 7
— You can clean the fi lter as below:
1. Soak them for about 3 minute in hot
water (40-50 degrees) with a grease-
loosening detergent then brush it gently
with a soft brush. Please do not apply too
much pressure ,avoid to damage it .
2. It can be put into a dishwasher with
detergent ,set the temperature at around
60 degrees.
— Please do not use abrasive detergent for
it will damage the hood.
Note
Make sure that cooker hood is shut
down before cleaning.
• INSTALLING THE CARBON FILTER (OPTINAL), SEE PIC.8
— Remove the fi lters see Pic.7.
— The charcoal fi lters (Pic.8) are located
at either end of the motor. Turn the
charcoal fi lters anti-clockwise until they are
unscrewed.
— Apply reverse procedure to uninstall the
charcoal fi lter.
Warning:
the charcoal cannot be washed or re-
cycled. It should be changed at at three or
six months according to your cooking habit

• CHANGING THE LIGHT BULB

Take the bracket and glass off and then take
the broken light bulb off, See Pic 9.
Fix the new light bulb,glass and bracket on.
Attention:Before changing the lights, ensure
that the appliance is not live.
14
Pic 7
Pic 8
Pic 9