fourstargroup 11222722CL Instrucciones De Montaje

MODEL: 11222722CL
6 DRAWER ORGANIZER
STEP 1
INSTALL DOWEL (1) INTO PANEL (B) & (C), AS SHOWN.
INSERT CAM-LOCK NUT (8) INTO THE PRE-DRILLED HOLES ON
PANEL (B) & (C).
INSERT AND SECURE CAM-LOCK SCREW (9) INTO THE PRE-DRILLED
HOLES ON (A) (B) & (C).
INSTALL NAIL LEG (7) WITH HAMMER.
7
7
9
9
A
B
9
C
9
9
8
8
UNFINISHED
SURFACE
1
1
1
1
STEP 2
INSTALL DOWEL (1) INTO PANEL (D) (E) (F) (G) (H), AS SHOWN.
INSERT CAM-LOCK NUT (8) INTO THE PRE-DRILLED HOLES ON
PANEL (F) & (H).
1
UNFINISHED
8 SURFACE
1
1
F
8
8
1
1
1
D
1
1
1
1
1
1
1
1
E
G x 2
1
1
1
1
STEP 3 STEP 4
TIGHTEN BRACKET (3) TO REINFORCE PANEL (I) TO
PANEL (I) WITH SCREW (2). PANEL (H) WITH SCREW (2).
UNFINISHED
SURFACE
2
UNFINISHED
3
SURFACE
2
2
3
I
3
2
2
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING
AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT
DAMAGE TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
PHILIPS SCREWDRIVER
HAMMER
Do you have any questions? Missing small parts or hardware? If you need
6 DRAWER ORGANIZER
assistance with the assembly of your
support@fourstari.com or
please e-mail our Customer Service Department at:
call us at (800) 639-3803 or (508) 473-7688
if calling locally
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
STEP 5
ATTACH PANEL (F) TO PANEL (B). TIGHTEN CAM-LOCK NUT (8) USING
SCREWDRIVER.
COVER CAM LOCK WITH COVER STICKER (10).
F
UNFINISHED
SURFACE
7
7
9
FINISHED EDGE B
9
STEP 6
ATTACH PANEL (E) & (G) TO PANEL (B).
E
UNFINISHED
SURFACE
1
8
1
FINISHED EDGE
H
B
FINISHED EDGE
STEP 7
ATTACH PANEL (C) TO ASSEMBLED UNIT. TIGHTEN CAM-LOCK NUT (8)
USING SCREWDRIVER.
COVER CAM LOCK WITH COVER STICKER (10).
2
3
I
FINISHED EDGE
C
H
B
PARTS AND HARDWARE LIST
NO PARTS LIST
A TOP PANEL
B LEFT SIDE PANEL
C RIGHT SIDE PANEL
D CENTER PANEL
E 1 ST SHELF PANEL
F 2 ND SHELF PANEL
G 3 SHELF PANEL
RD
H BOTTOM PANEL
I SKIRT PANEL
J SIDE BACK PANEL
K CENTER BACK PANEL
STEP 8
ATTACH PANEL (D) TO ASSEMBLED UNIT.
8
H
10
I
G
G
STEP 9
ATTACH PANEL (A) TO ASSEMBLED UNIT. TIGHTEN
CAM-LOCK NUT (8) USING SHORT SCREWDRIVER.
COVER CAM LOCK WITH COVER STICKER (10).
I
8
10
QTY NO HARDWARE LIST QTY
1 PC 1 PLASTIC DOWEL 28 PCS
1 PC 2 SCREW 4 PCS
1 PC 3 L-BRACKET 2 PCS
1 PC 4 POWER PIN 18 PCS
1 PC 5 NON-WOVEN BIN(BIG) 4 PCS
1 PC 6 NON-WOVEN BIN(SMALL) 2 PCS
2 PCS 7 NAIL LEG 4 PCS
1 PC 8 CAM-LOCK NUT 6 PCS
1 PC 9 CAM-LOCK SCREW 6 PCS
2 PCS 10 COVER STICKER 6 PCS
1 PC
STEP 10
ATTACH PANEL (J) & (K) TO THE BACK
POSITION OF STORAGE WITH POWER PIN (4).
FINISHED EDGE
D
C
B
I
STEP 11
UNFOLD THE BIN (5) & (6) AND SLIDE INTO THE
STORAGE.
8
FINISHED EDGE
(6)
A
(5)
10
(5)
B
C
(5)
(5)
B
I
J
K
J
D
C
A
E
F
G
B
G
H
I
A
4
J
J
4
K
UNFINISHED
SURFACE
B
4
4
A
(6)