USING THE BLENDER
1.
For attaching jug, first
place the jug
into the
motor unit, then turn it in
clockwise (see fig.1).
2. Peeled or cored the fruit or vegetables and then cut it
into small dices, put the food piece into the jar. Usually
certain amount of purified water has to be added to
facilitate the smooth running of appliance. The amount of
mixture should not exceed the max level as indicated on
the jar. The best proportion of the fruit and water is 2:3.
Note: never use boiling liquids or run the appliance empty.
3. Replace the Top Cover on the jar.
4. You may add ingredient into the jar through the center
opening of top cover during operation, then replace
Measuring Cup if necessary. Let the tab of Measuring Cup
aligns with the groove of Top Cover, put down and turn
clockwise until the Measuring cup in place.
5. Connect the plug to the wall outlet and set Speed selector to your desired
setting. You can set the "PULSE" position if want to accelerate the process of
blending. The detailed information of Speed Selector is as following figure 2.