STACK-ON PC-95C Manual De Instrucciones

PC-95C
PC-95C-RTX
PC-95C-S
Serial #:
Your Combination:
IMPORTANT
Record your combination number.
Record the serial number from the tag on the case.
Keep combination in a secure place away from
children.
DO NOT STORE YOUR COMBINATION INSIDE THE
CASE.
SETTING YOUR OWN COMBINATION
When you first receive your case the
factory preset code is 0-0-0.
For security you must change the
preset code after opening the case.
®
Instructions
1. Set the combination (using the factory
code 0-0-0 for the first time) and turn the
knob clockwise to open.
2. Leave the knob turned in the open
(clockwise) direction.
3. On the inside lock face, move the lever
from the "A" to the "B" position.
4. Set the 3 wheel combination numbers
to your own combination.
5. With the cover open, turn the knob to the
locked (counterclockwise) position.
6. Return the lever on the inside lock face
from "B" to "A".
Your new combination is now set.
"A"
"B"
Record this new combination on this form
or store your combination on our secure
website at www.stack-on.com under
Service. If you write down your
combination you must keep this information
in a secure place, away from children, not
inside this case.
1
6
40209-1503