MODEL: 11227306
SWIVEL BARSTOOL
STEP 1
ATTACH LEG (E) AND LEG (F) USING SWIVEL TRAY (H) AND BOLTS (I) AS
SHOWN.
I
H
F
E
STEP 2
ATTACH EXTEND LEGS (D) AND CIRCLE (C) BASED ON THE STEP 1 FINISHED
PART USING LONG BOLTS (J) AS SHOWN.
D
C
F
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS. CARE
SHOULD BE TAKEN IN THE UNPACKING AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO THE
PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
CROSS HEAD SCREWDRIVER
Do you have any questions? Missing small parts or hardware? If you need
SWIVEL BARSTOOL
assistance with the assembly of your
support@fourstari.com or
please e-mail our Customer Service Department at:
call us at (800) 639-3803 or (508) 473-7688
if calling locally
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
STEP 3
ATTACH BACK (A) ONTO SEAT (B). THEN FIX BY PUTTING WASHERS (K)
UNDER LONG BOLTS (J) USING ALLEN WRENCH AS SHOWN.
STEP 4
ATTACH CUSHION (G) TO STEP 3 FINISHED PART BY USING SCREWS (L) AS
SHOWN.
J
NO
PARTS AND HARDWARE LIST
A
BACK
B
SEAT
C
CIRCLE
D
EXTEND LEG
E
LEG (ASCENDING)
F
LEG ( BELOW)
G
CUSHION
J
A
K
B
L
G
PARTS AND HARDWARE LIST
QTY
NO
PARTS AND HARDWARE LIST
1 PC
H
SWIVEL TRAY
1 PC
I
BOLT
1 PC
J
LONG BOLT
4 PCS
K
WASHER
1 PC
L
SCREW
1 PC
M
ALLEN WRENCH
1 PC
STEP 5
ATTACH STEP 2 FINISHED PART TO STEP 4 FINISHED PART BY USING BOLTS
(I) WITH SCREWDRIVER AS SHOWN.
I
WEIGHT MAXIMUM 250 LBS (113.6 KG)
CAUTION:
MAXIMUM LOADING
CAPACITY IS 250 LBS (113.6 KG).
DO NOT STAND, LEAN, WALK OR
JUMP! FAILURE TO COMPLY WITH
THIS CAUTION COULD RESULT IN
PERSONAL INJURY AND/OR
PROPERTY DAMAGE!
QTY
1 PC
8 PCS
6 PCS
2 SETS
4 PCS
1 PC