Cargo Liner Installation
1. To install 2nd row seat liner (A), open back seat doors and
tailgate. Put 3rd row seats in down position according to
Owner's Manual. Unfold liner and align to back of 2nd row
seats. Attach velcro located across top of seat liner to back
side of 2nd row seats (Figure 3).
FIGURE 3
2. Remove cargo liner (B) from package, unfold and place in
vehicle (Figure 4).
FIGURE 4
3. Insert 3 pads (C) located at back edge of cargo liner be-
tween carpet and plastic scuff plate. Hook bungee loops (D)
on side panels of cargo liner at rear of vehicle to attachment
knob (Figure 5).
Cargo Liner GMT930
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION
AUTH
FIGURE 5
4. Attach web ropes with hooks (E) to edge of plastic molding
next to rear side windows (Figure 6). Pull taut and adjust
web ropes as needed.
FIGURE 6
5. Smooth out any wrinkles in liner and adjust as needed.
Cargo Liner Variations
The cargo liner can be used in the following variations:
1. 2nd Row Seat Up - Attach velcro strip on backside of cargo
liner to bottom edge of seat liner.
2. 3rd Row Seat Up - Separate velcro strip on backside of
cargo liner from velcro loop on bottom edge of seat liner.
Attach velcro strips at sides of seats to veclro strips on side
panels of cargo liner.
Care and Cleaning
•
For best results, install liner in a surrounding environ-
ment of at least 65°F.
•
To clean liner, hand wash in mild detergent. Rinse
thoroughly and hang liner to air dry completely. Do not
machine dry!
•
Periodic treatment with a UV protectant, such as GM
Goodwrench Leather & Vinyl Cleaner (PN 1050214) or
equivalent, is recommended.
•
Liner should be completely dry prior to storage.
IR 12OC05
PART NO.
INSTALLATION INSTRUCTIONS
DR
TITLE
Cargo Liner GMT 930
PART NO.
17803139
6200 Grand Pointe Dr., Grand Blanc, MI 48439
17803139
SHEET
2
SHEET
2
6
OF
6
OF