GM 23383593 Instrucciones De Instalación

Parts Included with Accessory Kit:
Description
I sheet
Bolt/screw PN 11519376
Bolt/screw PN 11515397
Deflector kit
Front deflector
Front deflector
Front brake duct
Front Brake duct
Fastener Caution
Caution: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application.
Do not use paints, lubricants, or corrosion inhibitors on fasteners, or fastener joint surfaces, unless specified. These coatings affect
fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications
when installing fasteners in order to avoid damage to parts and systems. When using fasteners that are threaded directly into
plastic, use extreme care not to strip the mating plastic part(s). Use hand tools only, and do not use any kind of impact or power
tools. Fastener should be hand tightened, fully seated, and not stripped.
Removal and Installation Procedure:
1. Remove the front wheel liners - Remove the applicable front bumper valance panel. Remove the front wheelhouse liner
fasteners (1, 2, and 3) from the front wheelhouse liner (4).
2. Remove the front wheelhouse liner retainers (1) from the front wheelhouse liner (2).
Front Brake Duct
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
Front Brake Ducts Install Instructions
Accessory Kit Part Numbers: 22898852
IR 03JN15
03JN15
Qty
1
8
4
1
1
1
1
1
23383593
PART NO.
DATE
Initial Release - John Kalbfell
1
SHEET
REVISION
10
OF
AUTH
2425899