Publicidad
Idiomas disponibles
Idiomas disponibles
4. Peel back approx. 50mm (2") of tape liner from EACH of the
tape sections and fold at 45° to outside of side window
deflector. DO NOT TOUCH EXPOSED SURFACE OF TAPE.
(Figure 4).
FIGURE 4
5. Position the side window deflector on the door frame. Double
check positioning of side window deflector as per step 1,
then apply light pressure to exposed tape areas.
FIGURE 5
Side Window Deflector
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
°
45
EXPOSED
TAPE
TAPE LINER
REVISION
AUTH
6. Peel remaining tape liner by pulling on exposed ends of
liner, and apply firm pressure around attachment areas.
FIGURE 6
7. Using a clean, soft cloth rub down firmly around attachment
areas 4 times to ensure maximum adhesion.
FIGURE 7
PART NO.
IR 22AP08
INSTALLATION INSTRUCTIONS
DR
TITLE
Side Window Deflector
PART NO.
19158475
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19158475
SHEET
2
SHEET
2
6
OF
6
OF
Publicidad
