Uvex pheos LED Lights Manual Del Usuario página 13

Attaching to the uvex pheos
For assembly, please follow point 3. Guide the
headlamp fixation into the receiver on the helmet.
Ensure that the helmet lamp is firmly seated on
the helmet.
Accumulator
The lamp is equipped with a special Li-ion
accumulator. uvex guarantees a minimum of 500
loading cycles. Please contact our customer
service in the event of loss of capacity. Do not try
and open the lamp.
Function fault
Check whether the accumulator is fully loaded.
Check the contacts for corrosion. In case of
corrosion, carefully scrape the contacts without
bending them. If your lamp still does not function
after this, please contact the uvex customer
service.
GB | 13