Descargar Imprimir esta página

Coleman 58016_06-16-16 Manual Del Usuario página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Congratulations on your Coleman® solar product purchase. This product is designed to the highest technical
specifications and standards. It will supply years of maintenance free use. Please read these instructions thoroughly
prior to installation, then store in a safe place for future reference. If at any time you are unclear about this product,
or require further assistance, please do not hesitate to contact our trained professionals operating the customer
support line at 1-888-478-6435 or email info@sunforceproducts.com.
2.5 Watt Solar 12-volt Battery Maintainer:
Includes: Alligator battery clamps, 12V DC plug, 8 ft. of wire (2.4m), suction cups
Power Rating: Maximum rating 2.5 Watts (under ideal conditions)
Current: 167 mA @ 15Volts
Features:
Quickly connects and disconnects from the battery
Overcharge and discharge protected
Does not need direct sunlight; amorphous solar panel will work in cloudy conditions
Weatherproof design
Durable – covered by a five year limited warranty
Maintenance-free, lightweight compact design
Frame constructed from recycled materials
12-volt battery not included
Operating Instructions:
For optimal power, ensure the panel is directly facing the sunlight.
WARNING:
Follow the below instructions carefully to not cause any bodily harm
Correct polarity must be observed for product to function properly and safely
Risk of fire, electric shock, and injury to persons if operating instructions are not followed
Any misuse or tampering of the product and/or any included accessories will void warranty and may cause
bodily harm
Follow all safety instructions provided by the battery manufacturer when handling 12V batteries. Always
wear safety glasses. Keep sparks, flames and cigarettes away from batteries at all times.
Installation:
Your 2.5 Watt Solar 12-volt Battery Maintainer may be installed using either the 12V DC Plug or alligator battery
clamps.
(1) Installation Through the 12V DC Plug:
The 12V DC Plug is for connecting the solar battery maintainer to the vehicle battery through a 12V socket. Firstly,
plug the "Quick Connect" end of the 12V DC Plug into the Quick Connect of the solar panel. Then, insert the plug
into the 12V DC socket in the vehicle. Make sure both ends are secure and aligned correctly. The 12V socket in
the vehicle must remain live when the ignition is in the "off" position for the solar panel to charge.
(2) Installation to Battery by Alligator Battery Clamps:
The alligator battery clamps provide a direct connection to the vehicle battery terminals. Plug the "Quick Connect"
end of the battery clamps into the Quick Connect of the solar panel. Then, connect the alligator clamps correctly to
the 12V battery by matching the red clamp (Positive (+)) to the Positive (+) terminal on your battery. Connect the
black clamp ( Negative (-)) to the Negative (-) terminal on your battery.
WARNING: Alligator clips must be placed on the battery in the aforementioned order. Wrong connections may
cause sparking or explosion.
Mounting with Suction Cups to the Windshield:
Insert 2 suction cups into the pre-drilled ends of the solar panel. Make sure they are secured properly in the panel.
Choose a location, preferably facing the sunlight, and attach to the windshield or other glass surface. For best
results, ensure the windshield is dry, clean, at room temperature, and lubricate the suction cups before mounting.
Note: This solar battery maintainer has a built-in blocking diode to prevent discharge.

Publicidad

loading