Working Safely - Festo 8048616 Instrucciones De Utilizacion

•
Hazard-free operation of the device is no longer possible in the case of:
– Visible damage
– Malfunction
– Incorrect storage
– Incorrect transport
– Switch off the power supply immediately.
– Protect the device against inadvertent restart.
•
Electrical connections may only be established and disconnected when the system is not connected to
the power supply.
•
Use extra-low voltage only: max. 24 V DC.

4.5 Working safely

General
•
Trainees should only work with the circuits under the supervision of an instructor.
•
Electrical devices (e.g. power supply units, compressors and hydraulic power units) may only be
operated in training rooms which are equipped with residual current devices (RCDs).
•
Observe the specifications included in the technical data for the individual components, and in
particular all safety instructions! Malfunctions which may impair safety must not be generated in the
training environment, and must be eliminated immediately.
•
Wear personal safety equipment (safety glasses, safety shoes) when working on circuits.
Electrical system
•
Only establish or interrupt electrical connections when the power is disconnected.
•
Use only connecting cables with safety plugs for electrical connections.
•
Defective connecting cables and safety plugs must be replaced immediately.
•
Always pull on the plug when disconnecting connecting cables; never pull the cable.
Circuit breakers and RCDs are the subject matter of the training device and do not have any
protective function. Protection against contact is provided by safety extra-low voltage.
© Festo Didactic 8048652
Electrical Protective Measures EduTrainer – Operating Instructions
11