Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY CONTINUED
2. Align base (F) with holes on open end of column (E).
3. Place tabletop (G) upside down. With second
Use three M8 x 1⁄" bolts (A) to secure. (See Figure 2)
person, align tabletop mounting plate (D) from
assembled base with holes in tabletop. With second
person holding assembled base in place, use
Figure 2
eight #5 x 1" screws (B) to secure mounting plate to
tabletop. (See Figure 3)
A
Figure 3
F
B
E
D
4. With second person, set table upright. Adjust
leveling feet to compensate for uneven floors.
Completed Assembly
Note the position of the base.
1-800-295-5510
uline.com
PAGE 2 OF 6
1021 IH-6966
Publicidad
