Kit Preparation - Metra 82-8139 Instrucciones De Instalación

Door Disassembly
1. Remove (2) Phillips screws from the front edge of the door panel.
2. Remove (3) Phillips screws from the bottom edge of the door panel.
3. Remove (1) screw from the door pull cup, and then remove the cup.
4. Using a window crank removal tool, disengage the spring clip and remove the crank handle.
5. Remove (1) screw from the door latch trim and then remove the trim.
6. Remove (2) Phillips screws from the front edge of the door panel.
7. Lift up the door panel, disconnect the wiring and then remove the panel.
8. Remove (4) screws securing the factory speaker, and then disconnect the wiring.
82-8139

Kit Preparation

1. Mount the aftermarket speaker to the speaker adapter plate
with the screws supplied with the speaker. (Figure A)
2. Locate the (4) mounting positions ("A") on the door frame,
and then insert (4) nylon inserts supplied. (Figure B)
(Figure A)
2
(Figure B)