fourstargroup 11210982P Manual De Instrucciones

MODEL: 11210982P
COMPUTER DESK
STEP 1
ATTACH L-BRACKET (3) TO SKIRT PANEL (D), USING SCREW (2)
AS SHOWN.
D
2
3
3 L-BRACKET - 2 PCS
2 TAPPING SCREW - 2 PCS
STEP 5
ATTACH APPRON PANEL (G) TO TOP PANEL (A) USING 1½
SCREWS (1), WOODEN DOWELS (4) AND GLUE (5).
1 1½ SCREWS – 2 PCS
4
4
WOODEN DOWEL
– 2 PCS
5 – 1 PC
GLUE
5
A
G
B
E
1
C
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
ASSEMBLY TOOLS REQUIRED
RUBBER MALLET
HAMMER
PHILIPS SCREWDRIVER
Do you have any questions? Missing small parts or hardware? If you need
assistance with the assembly of your COMPUTER DESK please e-mail our
support@fourstari.com or
Customer Service Department at:
call us at (800) 639-3803 or (508) 435-4830
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
STEP 2
2-1 ATTACH INSERT CAP (11) TO SIDE TOP PANEL (F).
2-2 ATTACH CAP (9) AND LEG (10) TO SIDE BOTTOM PANEL (I).
F
11
9
I
10
9 CAP - 2 PCS
10 LEG - 2 PCS
11 INSERT CAP - 1 PC
STEP 6
ATTACHED LONG TUBES (7),
SHORT TUBES (8) AND LEGS
(10) TO SIDE TOP PANELS (F),
SIDE CENTER PANEL (H) AND
10
SIDE BOTTOM PANEL (I) AS I
SHOWN.
7
H
8
7 – 1 PC
LONG TUBE
8 – 1 PC
SHORT TUBE
F
10 – 1 PC
LEG
NO HARDWARE LIST
1½" SCREW
1
2 ½" SCREW
3 L-BRACKET
4 WOODEN DOWEL
5 GLUE
6 NAIL WITH PIN
7 LONG TUBE
8 SHORT TUBE
if calling locally
9 CAP
10 LEG
11 INSERT CAP
STEP 3
ATTACH SKIRT PANEL (D) AND
BOTTOM BACK PANEL (E) TO
LEFT SIDE PANEL (B) AND
RIGHT SIDE PANEL (C) USING
SCREWS (1).
B
1 1½ SCREWS – 8 PCS
STEP 7
USING ASSEMBLED STEP 6 TO RIGHT SIDE PANE (C) AND
ATTACH SIDE TOP PANELS (F)TO APPRON PANEL (G) AS
SHOWN.
F
A
G
B
H
E
C
I
PARTS LIST AND HARDWARE
QTY
NO
14 PCS
A TOP PANEL
4 PCS
B LEFT SIDE PANEL
2 PCS
C RIGHT SIDE PANEL
8 PCS
D SKIRT PANEL
1 PC
4 PCS
E BOTTOM BACK PANEL
1 PC
F SIDE TOP PANEL
1 PC
G APRON PANEL
2 PCS
H SIDE CENTER PANEL
3 PCS
I SIDE BOTTOM PANEL
1 PC
STEP 4
4-1 ATTACH WOODEN DOWELS (4) TO BACK OF TOP PANEL (A)
USING GLUE (5) .
4-2 ATTACH TOP PANEL (A) TO ASSEMBLED FROM STEP 3 USING
L-BRACKETS (3) AND ½ SCREWS (2).
4-3 ATTACH NAIL WITH PIN (6) TO BOTTOM OF LEFT SIDE PANEL (B)
1
AND RIGHT SIDE PANEL (C)
AS SHOWN.
E
C
D
D
C
E A
4
5
STEP 8
ATTACH AND SECURE ASSEMBLED STEP 7 BY USING 1½
SCREWS (1) AS SHOWN.
A
F
B
H
E
C
I
1
1 1½ SCREWS – 4 PCS
PARTS LIST QTY
1 PC
1 PC
1 PC
2 PCS
1 PC
2 PCS
1 PC
1 PC
1 PC
6
B
2
3
2 – 2 PCS
½" SCREW
4 – 6 PCS
WOODEN DOWEL
5 – 1 PC
GLUE
6 – 4 PCS
NAIL WITH PIN
This unit is intended for use only with the products
and maximum weights indicated. Use with other
products or products heavier than the maximum
weights indicated may result in instability causing
possible injury. Furniture can tip over or break if
improperly moved. Have a friend help to lift and
carry the unit to its new location.
Shelf weight limit:
107 lbs. (48.5 kg)
Shelf weight limit:
58 lbs. (26.3 kg)
Shelf weight limit:
43 lbs. (19.5 kg)
Shelf weight limit:
43 lbs. (19.5 kg)