VuPoint DC-ST1624-VP Manual Del Usuario página 5

Installing the batteries
1. Open the battery door.
2. Insert 2x AAA alkaline batteries into the camera.
3. Close the battery door.
Inserting a memory card (not included)
Follow the instructions below to insert the optional micro SD memory card into the camera.
1. Turn off the camera first.
2. Open the battery door.
3. Insert the micro SD card into the camera.
Note: There is only one right direction to insert the micro SD memory card into the slot. Do not force the
card into the memory card-slot, it may damage both the camera and the micro SD memory card.
Note: The micro SD memory card must be formatted before taking photographs. See the following
sections for more information.
Formatting the memory or micro SD card
1. Press the menu button (
2. Select the setup mode by press the right button.
3. Select the format icon by press the
4. Select Internal memory or SD card and confirm with the SHUTTER button.
Zoom in and out
The camera can zoom in up to 8 times.
Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the
maximum zoom ratio.
Playback photographs
1. Press the( ) button to get into playback mode.
2. The last picture or video clip taken will be displayed. Use the left or right buttons to flip
through the pictures or videos
All manuals and user guides at all-guides.com
) in PHOTO or VIDEO mode.
W
( ) button and press the SHUTTER button to confirm.