LG VH920 DS Serie Manual Del Propietário página 5

IMPORTANT SAFETY INSTRUCTIONS
WARNING
• Use it only on bedding items such as blankets,
mattresses, pillows, or cloth sofas.
Do not use this appliance to suck in dust, cement, or any
construction debris.
Do not use on leather upholstered surfaces.
It may cause fire and unrepairable product damage.
• This appliance is designed for normal indoor domestic
use only. It is not to be used for any office or commercial
application.
• No one other than a repair technician shall disassemble
or modify the product.
It may cause fire or electrical shock.
• Do not spray combustible materials such as gasoline or
solvents, or surfactants such as detergents or bathing
goods, or drinks near the cleaner and it's sterilizer
station.
It can cause an explosion or fire.
• Do not allow the power cord to be crushed, kinked or cut
by heavy objects.
Using a damaged cord or plug could cause fire or electrical
shock. When the power cord is damaged, it is dangerous,
so please have the cord replaced by an authorised service
center.
• Do not let liquid such as water enter the product, and do
not use the unit to pick up liquids, sharp pointy objects,
or hot embers.
It causes fire or electrical shock.
If water accidently enters the unit, immediately turn off the
power switch of the main body, pull out the power plug, and
contact LG Electronics Service Agent to avoid hazard.
• If the ELCB, GFCI is triggered when the power is turned
on, immediately stop its use and call an Authorised
Service Provider.
Failing to do so can cause electric shock.
• Do not insert pins or sharp pointy utensils into or around
the machine or its sterilizer station.
There is a risk of electrical shock.
• Do not use the appliance if gas odors can be detected.
Unplug the unit and provide ventilation to avoid possible
dangers.
There is a risk of fire or explosion.
• Always remove the power cord from the wall socket from
the outlet and ensure that the unit is turned off before
doing so.
Failing to do so can cause fire or electrical shock.
• Make sure that the unit is plugged into a wall socket over
10amp and not overloaded.
Overloading of any wall socket can cause fires and product
malfunction.
• Do not use the appliance if the power cord or socket is in
any way loose or damaged.
It can cause fire or electrical shock.
• Do not operate the appliance with the suction inlet or
outlet which are blocked.
It causes deformation of main body or fire by overheating.
• Do not operate the cleaner while dust bin is taken out.
There is a risk of product damage or electrical shock injury.
• Do not place power cord and the product near heating
devices.
It can cause deformation of main body, malfunction, or fire.
• Be careful that your fingers do not touch the pins when
you pull out the plug from the mains outlet.
It can cause electrical shock.
• Do not allow children or pets to play with the product or
use the product as a toy.
It can cause personal injury and damage to the unit.
• Do not handle the plug with wet hands.
It may cause electrical shock.
• Do not clean the inlet with water and use immediately
after drying the components first.
It may cause electrical shock and malfunction.
• When you clean the exterior, make sure to pull out the
power plug, and do not wash with harsh or abrasive
solutions.
It can cause electrical shock and exterior damage.
• Do not place hands into the intake while the appliance
is operating. Allow the unit to stop operating and
disconnect from the wall socket to avoid any personal
injury.
• Do not wash the exterior of inlet or bottom surface with
water or detergent. Use only a damp cleaning cloth.
It may damage product or cause electrical shock.
• When the sterilization is in operation, do not attempt to
look directly into the UV light.
It may harm your eyes or skin, and may cause skin ailment
such as red spots. Should this occur, consult your local
physician.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• Do not use the product at a place subject to lots of
industrial oil fumes or metal particulates.
Doing so can cause fire or product failure.
• Do not use the product at a place subject to leakage or
probable leakage of combustible gases.
It may result in fire or explosion.
5