Publicidad
C
E
D
Step 3 - Insert the top end joints (C)
onto the bottom frame part (E).
MAINTENANCE:
1.
For best results and longer life, store your stand out of the weather to reduce possible rust
problems. Prolonged exposure to weather conditions including snow, rain, and humidity are
not covered under the warranty, nor is damage caused by normal wear, mildew, improper
care including storage, maintenance, and installation.
2.
BEFORE EACH USE, INSPECT ALL MOUNTING HARDWARE, STAND PARTS, POINTS OF CONNEC-
TION AND YOUR HAMMOCK FOR INDICATIONS OF WEAR OR DEFECTS PRIOR TO EVERY USE.
3.
Should the painted surface become scratched or chipped, obtain a matching paint and touch
up spots where the underlying metal is exposed to inhibit rust.
DO NOT EXCEED THE SUGGESTED WEIGHT LIMIT FOR YOUR HAMMOCK COMBO
WARRANTY INFORMATION: Texsport guarantees this product to be free of defects in workmanship
and materials for up to one year after the purchase date. If an item is found to be defective within
one year of its purchase, it will be replaced without charge upon the return of the unit accompa-
nied by a sales receipt. If you choose to return an item you must contact our customer service de-
partment at 800-231-1402 for further instructions. Manufacturer not responsible for rot or decay
caused by natural elements and wet climate conditions. It is suggested that the stand and or ham-
mock be removed from the elements when not in use.
Questions: If you should have any questions, problems or comments, please call our Customer
Service Department at 1-800-231-1402 or e-mail info@texsport.com. This Department is open M–F
from 8 a.m.–5 p.m. CST.
D
E
C
E
Step 4 - Attach the hammock to the stand
with the metal suspension rings to the
hooks on the top end joint.
This is how your hammock/stand combo
should look.
Publicidad
