Publicidad
Step 2 - Insert an end pole with end cap (B) into the opposite end of the foot bracket. Make sure
the holes at the top of the poles face each other when they are inserted into position.
Step 3 - Place an "S" hook (Part D) in each of the top holes in Part B.
Step 4 - Attach the end of each chain containing "S" hook to the ring on each end of the hammock.
DO NOT ALLOW THE CHAIN TO BECOME TWISTED.
NOTE: Once you have used your hammock, it may hang lower due to stretching of the ropes. This
is to be expected. To have the hammock hanging at the height originally chosen, simply decrease
the number of links used where the chain attaches to the hook. Make certain you follow the pre-
cautions regarding hanging and straightening of the chain.
MAINTENANCE
1. For best results and longer life, store your stand out of the weather to reduce possible rust problems.
2. BEFORE EACH USE, INSPECT ALL MOUNTING HARDWARE, STAND PARTS, POINTS OF CONNECTION AND
YOUR HAMMOCK FOR INDICATIONS OF TEAR OR DEFECTS, REPLACE ALL WORN PARTS PRIOR TO USE OF YOUR
STAND OR HAMMOCK.
3. Should the painted surface become scratched or chipped, obtain a matching paint and touch up spots
where the underlying metal is exposed to inhibit rust.
CAUTIONS AND WARNINGS
DO NOT allow the connections (where one part inserts into another part) to become loose or less than totally
inserted. Inspect prior to every use, to make certain that one part is fully inserted into the other part.
DO NOT EXCEED THE SUGGESTED WEIGHT LIMIT FOR YOUR HAMMOCK STAND
Questions:
If you should have any questions, problems or comments, please call our Customer Service Department at
1-800-231-1402 or e-mail info@texsport.com. This Department is open M–F from 8 a.m.–5 p.m. CST.
Publicidad
