Publicidad
Idiomas disponibles
Idiomas disponibles
the last cell on bottom right; the display
shows "STORE USER / YES < > NO";
press
to confirm; press
modify the name.
If confirmed, the display shows the
second name. The display is empty if
no names are programmed; enter
the name and code as indicated
above.
Once you have confirmed the last
name, bring the jumper J1 back to
the original position (from 2-3 to 1-2).
The display shows "waiting" and an
automatic status bar. Normal
operation is restored after a few
seconds and the display shows the
initial text (see "Operation").
Notes. Once you have entered 250
names the display shows "waiting" and
an automatic status bar. After a few
seconds
the
display
"Programming / type: " and you can
continue with programming or exit by
moving the jumper J1 back to 1-2.
You can enter 2 or more names with the
same call number (i.e. different family
names in the same apartment).
Modification or correction of names
Move the jumper J1 from 1-2 to 2-3.
Enter the code 01 and press
display shows the first name.
Press
to search for the name you
want to modify; (hold the button
pressed for quick searching).
Press
to go to the character you
want to modify.
Select the character with
(backward).
Repeat the operation until you have
completed the name modification;
Table 2 - Table of system programming codes (code 03)
Programming
Function description
code
bit 0
not used
bit 1
call number rings
bit 2
door lock activation with
bit 3
deactivation of tone generator on the external door station
bit 4
activation of personalized initial screen (2)
bit 5
deactivation of FARFISA and activation of personalized text
bit 6
not used
not used
bit 7
(1) This functions allows for quicker door lock activation by pressing
press
+ password +
(2) You can alternate "FARFISA" with the personalized text (see "personalisation of display initial text").
enter a space to delete a letter.
Once you have completed the modi-
to
fication, hold
play shows "STORE USER / YES < >
NO". Press
modify the name again.
Addition of 1 or more names to the
list
To add a new name to existing list
you must:
move the jumper J1 from 1-2 to 2-3.
enter the code 01 and press
display shows the first name.
press
to scroll the list; the display
is empty after the last name (hold the
button pressed for quick searching).
to enter a new name follow the opera-
tions described in "Entry of names".
If confirmed, the name is placed in
shows
the list in alphabetical order.
Deletion of name
Move the jumper J1 from 1-2 to 2-3.
Enter the code 01 and press
display shows the first name.
Press
to search for the name you
want to delete; (hold the button
pressed for quick searching).
Press
to go to the last cell (bottom
; the
right); enter a space to delete the
existing number.
Press
again; the display shows
"DELETE USER / YES < > NO". Press
to confirm or
name.
Press
to confirm or
(forward)
the name.
The next name is displayed after you
have deleted the name.
(1)
.
Language selection (code 02)
In operating mode you can choose one
pressed until the dis-
of available languages. To select a
language you need:
to confirm or
to
; the
System programming (code 03)
You can change or activate the
functions of the push-button panel (see
table 2) .
Before programming you must:
; the
to go back to the
to go back to
rather than dialling the code 00+
move the jumper J1 from 1-2 to 2-3.
enter the code 02 and press
display shows "Italiano" in case of first
programming or the programmed
language.
press
or
to select the language.
press
to confirm; the display shows
"Programming / type: ".
continue by entering the code of a
new programming or exit by moving
the jumper J1 back to 1-2.
Move the jumper J1 from 1-2 to 2-3.
Enter the code 03 and press
display shows "bit 0 = 0 / 0 < > 1".
press
for no change and go to the
next code; the display shows "bit 1 =
0 / 0 < > 1" in case of first program-
ming or "bit 1 = 1 / 0 < > 1" if changed
in the previous programming.
Press
to select 1 or
Press
to confirm and go to the next
code.
Once you have confirmed the value
of the last code (bit 7), the display
shows "Programming / type: "
Continue by entering the code of a
new programming or exit by moving
the jumper J1 back to 1-2.
Default Value entered with buttons
value
= 0
0
-
5
5
NO
NO
NO
NO
NO
NO
NO
NO
0
-
0
-
. For example:
Mi 2437/1
; the
; the
to select 0.
= 1
-
1
YES
YES
YES
YES
-
-
12
Publicidad
