Network Cameras List; Software Update - Panasonic Viera Serie Manual De Usuario

Network cameras list

Before using a Network camera, you need to register the camera as shown below. You can also set to
Default camera or Disconnect/Delete the registered cameras.
Press "Network cameras list" and
display screen
Set Network camera setting
Network cameras list
Camera name Model
Camera 1 BL-C210A
... ...
... ...
... ...
... ...
... ...
... ...
... ...
Select OK
RETURN
Find cameras
Disconnect
●
For this operation, please refer to the operating
manual for the Network camera.

Software update

Select "Software update"
Menu Network settings
Connection test
Network connection
Wireless network
IP address/DNS settings
Network cameras list
Software update
Mac address
38
Status Default
Connected
...
...
...
...
...
...
...
Delete
Default camera
Wireless (WiFi)
00-0b-97-7c-65-e9
Start camera search.
●
Before you start to search for a camera, switch the
camera to registration mode.
●
Search condition also depends on "Network settings"
select
Delete camera information.
Disconnect to camera.
"Disconnected" will be displayed in "Status".
Set to default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
Connect to Camera. "Connect" will be displayed in
"Status".
Press OK to start the Software update screen
Follow directions on the screen
select
●
Set "Clock" first. (p. 15)
OK