Introduction; Features; Safety Instructions - Phonic NEXUS 915SB Manual Del Usuario

INTRODUCTION

Congratulations on your purchase of one of the
quality Nexus Subwoofer speakers. Each of these
units features stereo XLR inputs and outputs, while
the 935SB goes further to include two powered 1/4"
outputs. These subs will undoubtedly provide you
with many years of faithful use. However, to make
the most out of the Nexus Subs, ensure you read
this manual thoroughly – including all warnings and
safety instructions. This will help prolong the life of
the sub, as well as ensure the safety of you and
those around you.

SAFETY INSTRUCTIONS

1. Read all instructions carefully before using your Nexus Subwoofer Speakers.
2. Keep this user's manual for future reference.
3. Ensure you follow all instructions carefully.
4. Do not use in conjunction with power amplifiers or powered mixers.
5. Warning – The Nexus Speakers generate extremely high sound pressure levels. Ensure you take care
in the placement and operation to avoid exposure to extremely high sound levels, to reduce to risk of
causing permanent hearing damage.
6. Mounting – The suspending, rigging and mounting of the Nexus Speakers can cause members of
the public to be exposed to serious health risk, as well as the possibility of death. If you are NOT fully
qualified and certified to mount these speakers by relevant local, state, or national authorities, do not
under any circumstances try to rig, suspend or mount this system. All relevant safety regulations must
be followed. If you are not completely qualified or do not know of said regulations, ensure you consult
qualified personnel for assistance.
7. Servicing – Do not under any circumstances try to service this product by yourself. If servicing is
required, contact your local service center.
4

FEATURES

• Built-in 450 Watt (RMS) amplifier
•
Balanced XLR input and output
•
Two 1/4" phone jack outputs for powering
passive speakers with 100 Watts of power (per
channel) (Nexus 935SB)
•
Built-in protection circuitry
•
Lightweight cabinet with dynamic sound
•
128 dB Max SPL (1 Watt @ 1 meter)
(Nexus 915SB)
•
123 dB Max SPL (1 Watt @ 1 meter) (Nexus
935SB)
•
22k ohm input impedance
•
35mm pole mounting point
NEXUS 915SB / 935SB