Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
• Improper installation of this product can result in personal injury. Always
wear safety goggles when cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
• Not pool code approved.
• Do not allow children to play with the gate.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement
parts call: 1-800-336-2383.
Component list:
QTY
Description
1
Heavy-Duty Y-Latch
1
Stop Bracket
6
Hex head screws
DOUBLE DRIVE GATE INSTALLATION
Determine Gate Opening:
1
Determine the gate opening by adding the width of the gates
plus clearance of hinges plus a clearance distance of 1
3" for the Heavy-Duty Y-Latch (Fig. 1).
(See hinge instructions for clearance details.)
NOTE: Mount gate on hinges prior to installing the Heavy-
Duty Y-Latch.
Attach Heavy-Duty Y-Latch to Fence Gate:
2
Place and hold Heavy-Duty Y-Latch on gate upright. Attach
Heavy-Duty Y-Latch to gate upright with three hex head
screws (Fig. 2).
Determine Location of Stop Bracket:
3
While the swing arms are lowered and leveled, place stop
bracket at on the gate while moving the bracket up or down
until the swing arm is level. Once the swing arm is level, mark
with a pencil the stop bracket location on the side of the gate
(Fig. 3).
Attach Stop Bracket to Gate:
4
With the gate opened, place stop bracket on the gate and
align with the pencil mark. Attach stop bracket to gate with
the remaining three hex head screws (Fig. 4).
WALK GATE INSTALLATION
Determine Gate Opening:
1
Determine the gate opening by adding the width of the gate
plus clearance of hinges plus a clearance distance of 1
3" for the Heavy-Duty Y-Latch.
(See hinge instructions for clearance details.)
NOTE: Mount gate on hinges prior to installing the Heavy-
Duty Y-latch.
Attach Heavy-Duty Y-Latch to Fence Gate:
2
a. For walk gates utilizing 2
uprights, the Heavy-Duty Y-Latch can be installed in the
same method as the double drive gate installation (Fig. 5).
b. For walk gates utilizing 2
uprights, the post will serve as the Heavy-Duty Y-Latch
swing arm stop.
NOTE: Do not install the stop bracket because it will not
t on post upright (Fig. 6).
PADLOCK OPTIONS
Fig. 3, 4 and 5 Heavy-Duty Y-Latch installation should use
1
padlock option 1 shown in Fig. 7.
Fig 6 Heavy-Duty Y-Latch installation should use padlock
2
option 2 shown in Fig. 7.
Heavy-Duty Y-Latch Kit
Installation Instructions
To obtain and review a copy of the warranty please go to: BoerboelGateSystems.com/warranty.
You can also contact 1-800-336-2383 or write to Boerboel Gate Solutions, 7830 Freeway Circle,
Middleburg Heights, Ohio 44130 to request a copy of the warranty.
3
3
3
⁄
⁄
⁄
⁄ " gate uprights and 2
⁄
⁄
⁄
⁄ " post
1
1
1
1
1
1
2
2
2
2
⁄
⁄
⁄
⁄ " gate uprights and 3" post
1
1
1
2
2
BEFORE YOU BEGIN:
The primary design of the Y-latch
is for the aluminum double drive
gates with 2
⁄
⁄ " uprights.
⁄
⁄
1
1
1
2
2
Gate
Upright
2
⁄ ⁄
⁄
⁄
⁄ "
1
1
1
2
2
Stop Bracket
⁄
⁄ " to
⁄
⁄
4
4
Min. Spacing 1.75"
Min. Spacing 1.75"
Min. Spacing 1.75"
Min. Spacing 1.75"
Min. Spacing 1.75"
Min. Spacing 1.75"
Min. Spacing 1.75"
Min. Spacing 1.75"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Max Spacing 3.0"
Gate
Gate
Upright
Upright
⁄
⁄
⁄
⁄ " to
3
3
3
4
4
Post
Post
Post
Post
Upright
Upright
Upright
Upright
Gate
Gate
Upright
Upright
Upright
Upright
TOOLS NEEDED:
Safety Glasses
Tape Measure
Pencil
Drill
Hex Bit
Swing Arms
Screws
Fig. 1
Fig. 3
Gate
Gate
Upright
Upright
Fig. 5
Fig. 6
Post
Post
Post
Post
Upright
Upright
Upright
Upright
Gate
Gate
Gate
Gate
Upright
Upright
Upright
Upright
Upright
Upright
Arm Bracket
Fig. 2
Gate
Gate
Upright
Upright
Fig. 4
Gate
Gate
Upright
Upright
Pencil Line
Pencil Line
Pencil Line
Pencil Line
Fig. 7
Padlock Option 1
Padlock Option 1
Padlock Option 2
Padlock Option 2
Publicidad
