Washing The Mower Deck - Yard force YF22ESSPV Manual Del Operador

TO MAINTAIN THE AIR FILTER(Fig. 30)
Soiled air filters reduce the engine output by supplying too little air to the carburetor. If the air contains a lot
of dust, the air filter should be checked more frequently.
CAUTION! Never run the engine without the air filter element installed.
1. Remove the air filter cover.
2. Remove the filter cartridge.
3. To loosen debris, gently tap the filter cartridge on a hard surface. If the filter cartridge is excessively dirty,
replace with a new one.
CAUTION! Never clean the air filter cartridge with gas or flammable solvents.
Clean the air filter cartridge only with compressed air or by tapping it.
4. Install the filter cartridge.
5. Close the cover with an audible "click".
Fig. 30
filter cartridge

Washing The Mower Deck

The washing port allows you to connect a typical garden hose to the mower deck to remove grass and
debris from the underside.
CAUTION! Contact with the mower blade, or with objects thrown by the mower blade, could result
in death or serious injury.
• Before running the mower, make sure the hose is properly connected and does not come into
contact with the blade.
• When the mower is running, the person cleaning the mower deck must be in the operator position,
with no bystanders in the area.
1. Place the unit on a smooth level surface.
2. Place the mower in the highest cutting position. See Single Point Height Adjustment.
3. Attach a garden hose to the washing port(Fig. 31) on the mower deck.
4. Run water to remove grass and debris from the underside of the mower deck.
5. Turn the mower on.
6. Turn the mower off.
7. Remove the garden hose from the washing port when completed.
MAINTENANCE
Fig. 31
28
Washing Port