Midwest Feline Nuvo 139R-BL Manual De Instrucciones página 2

1.
Attach a Long Post with Screw (E) and two of the
Short Posts with Screw (F) to the Base (A). Insert
the pre-attached screws into the Base and rotate
posts until secure.
2.
Place one of the Oval Platforms (B) on the Short
Posts. Secure the Oval Platform with a Bolt (I) and
a Long Dual Thread Screw (K), Bolt attaches to
front (rounded edge of base) and Screw attaches in
back (corner of base). Tighten bolt with Allen
Wrench and cover with Bolt Cap (L). Tighten the
Screw until bottom threads disappear and top
threads stick out.
Attach the Long Post (G) to the Platform
placing on top of the Screw and rotating until
secure.
3.
Place the Hoop Hammock (C) on top of the Long
Post that is attached to the Base. Insert Short Dual
Thread Screw (J) through the top of the Scoop and
tighten until bottom threads disappear.
Attach the Short Post (H) to the Scoop and Long
Post by placing the post on the Screw and
rotating until secure.
4.
Place remaining Oval Platform (B) on top of Long
Post and Short Post. Use a Bolt (I) to attach
Platform to Long Post, tighten with Allen Wrench
and cover with Bolt Cap (L).
Insert a Long Dual Thread Screw (K) through the
Oval Platform through the Short Post, tighten until
bottom threads disappear. Attach Short Post with
Screw (F) to the Oval Platform by placing on Screw
and rotating until secure.
Attach Hooded Bed (D) to Short Post by placing on
top of Post's screw and rotate until secure.
Bolt (I)
Short Dual
Thread Screw (J)
Long Dual
Thread Screw (K)
Long Dual
Thread Screw (K)
Bolt (I)