Publicidad
Step 1: Place the table top (A) on a non-abrasive, such as a carpet with the underside
facing up. Attach the table legs (B) to the table top (A). Insert washers (G) and
M0.24''*0.59'' bolts (E) and plastic cap (F) into table legs (B). Repeat until all table
legs are secured. Hand tighten only.
Step 2: Attach support ring (C) to the table legs (B) by using washers (G) and M0.24''*0.98''
bolts (D) and plastic cap (F). Screw all bolts by using allen wrench (I).
Step 3: Use the allen wrench (I) to tighten all bolts. Do not over tighten. Over tightening may
strip bolts and washers. Place the table in the upright position. Then put umbrella
ring on the table. Now you have your new SQUARE TABLE.
Cleaning and Maintenance
●Clean frame parts with mild soap and water, rinse thoroughly. Dry frame parts completely.
Do not use bleach,acid, or other solvents on the fabric or metal parts.
●We recommend the use of furniture covers to protect the serve cart when not in use.
●Inspect and tighten all bolts on a regular basis to ensure proper performance and safety.
●In order to prolong the life and beauty of your Wicker Cooler Cart，we recommend storing
it in a dry and protected area during off season periods.
PAGE 5 OF 5
Publicidad
