ratiotec Soldi Smart Pro Manual De Instrucciones página 4

[EN]
CALIBRATION GUIDE Soldi Smart Serie Plus | Pro | Pro USD
A quick calibration can help when the
device shows problems recognising real
banknotes of different denominations.
If the problem is caused by a defective
component, or in case a full calibration is
required, you will need to contact the tech-
nical support.
Your ratiotec Team.
Plug the Soldi Smart to the power supply
1.
by means of the adaptor.
Turn on the device normally by pressing
2.
the ON/OFF key. The device turns on auto-
matically. Wait, until it is ready.
While the device turns on, press 4 times
3.
the ON/OFF key. The display will show the
message "ADJUST".
Introduce the pink calibration paper as if it
4.
was a banknote. The device will take it and
return it each time through the front.
On the display, "ADJUST" will blink. Af-
5.
terwards, feed the pink calibration paper
several times (6 – 10 times), until the mes-
sage "OK" appears on the screen.
Unplug the device to turn it off. Switch on
6.
the device again normally and test.
ratiotec GmbH & Co. KG | Tel.: +49 201 361 490 | Fax: +49 201 361 49 26 | Email: info@ratio-tec.de
Soldi Smart Plus
Soldi Smart Pro
Soldi Smart Pro (USD)