InMotion SCV V3 Manual De Usuario página 35

4.2. Light
There are LED lights on the front and the rear of the
unicycle, which are used for lighting and warning. As
there is no absolute sense of direction for INMOTION
unicycle, the unicycle switches the front and rear light
automatically according to the direction the vehicle is
moving in order to make sure the front is the front
headlight, and the rear is the red warning light.
To power on, slowly swipe your finger from the
right to the left on the interactive panel (shown as the picture in the right), and the icon for light on the panel will be on and both
lights will illuminate. Try to push the unicycle or ride on it, and the front light will automatically change to the front headlight,
and the rear light will be switched to red warning light. The user can control the front light to be permanently on, or to shut off the
front and rear lights through the smart phone app on a mobile device.
4.3. Data Bluetooth and Music Bluetooth
The INMOTION unicycle is equipped with data Bluetooth 4.0 BLE plug and an interface for music Bluetooth 3.0. The user can
use the former to connect the Bluetooth loudspeaker on the unicycle, or use the latter to communicate with the app on a mobile
device.
When the unicycle is powered on, turn on the Bluetooth of your mobile device, search and connect with the Bluetooth module of
the unicycle, and when the Music Bluetooth icon is on (shown in the figure above), you can enjoy the music on your
35