Sigma BC 1606L DTS Manual Del Usuario página 11

Pairing / Connection / Apareado
MPH MPH
0,0 0,0
CADENCE CADENCE
0 0
A
~20 sec
MPH
15,0
CADENCE 70
MPH
0,0
CADENCE
0
MPH KMH
0,0 0,0
CADENCE BC1606 DTS
0 16: 0 3
B
MPH
0,0
CADENCE
MPH
0
0,0
CADENCE
0
Pairing / Connection / Apareado
• After installing the bike computer into mounting bracket, SPEED and
CADENCE displays will blink ZERO.
• Press MODE until CADENCE is displayed. There are two ways to pair your
SPEED and CADENCE transmitters with the computer.
• 1. Ride. After 20 seconds (max 5 min.) the receiver will pair with both
transmitters and data will be displayed.
• 2. Spin front wheel until speed display stops blinking (A). Turn crank until
CADENCE stops blinking (B)
• ATTENTION: If CADENCE function is turned OFF, no pairing will take place.
If no CADENCE is detected after 5 minutes, CADENCE functions will
automatically turn off.
• After 5 min. without transmission, BC1606 DTS will go into sleep mode.
(Time of Day and Model name shown in the display). Press any button to
re-activate the computer. A short pairing will find the transmitter.
• Removing the BC1606 DTS from the mounting bracket will end the paired
connection.
• If "TOO MANY SIGNALS" message is displayed: lengthen the distance of all
transmitters and press any button to continue. Pairing will begin again.