ACME CarCamOne Manual página 10

180° turned recording
CC
Pressing the shutter button for 3 seconds after " " is displayed, the following modes are displayed turned by 180°. Recording is now upside down.
Memory voll [ ]
Records can´t be made until data from the SD-card will be deleted.
Delete [ ]
Deletes the last record, does not matter whether it was a video or photo.
Mounting of the baseplate
The CarCamOne baseplate can be fixed nearly everywhere by the supplied Velcro-pad. The CarCamOne and the baseplate are ready for external power
and triggering complies to the shutter button [2]. The contacts are located on the back of the CarCamOne and on CarCamOne baseplate as well.
After fixing the baseplate, press the camera on it carefully and pull it, as imaged, a little bit to the back.
The CarCamOne baseplate is appointed with 4 contacts. Allocation as follows: 1 signal | 2 signal | 3 earth | 4 +5 V min. 500mA
External shutter release
In all video modes "VR", "VE", "SR", "SE", and in photo mode "PE" recording is running while pins 1 & 2 are connected and will stop when disconnected.
In photo mode "PR" only one photo will be shot when pin 1 & 2 are connected. Connecting again will shoot the next photo.
The shutter speed will not be changed due to longer connection!
Software update