Suaoki U7 Manual Del Usuario página 8

Charging electronic devices
1. Choose the right charging cable for your electronic device.
2. You can either plug the USB-A connector at one end of the USB cable
(included) to the USB1/USB2 output port of the product or plug a USB-C
to USB-C cable (not included) to the TYPE-C port of the product.
3. Connect the USB-C connector at the other end of the cable to your
electronic device such as your cellphone and tablet.
4. Press the power button and the product will start charging the connected
device.
Using the flashlight
Long press the power button to turn on the flashlight. You can then
change the lighting modes in sequence with each click on the power
switch. There are 4 LED light modes that appear in the following
sequence: solid mode, SOS mode, flash mode and red warning light
mode.
Features of smart battery clamp
1. Battery voltage detection. If the detected voltage is abnormal, alarm would
be set off (the red indicator light stays on and the buzzer beeps) and the
output would be turned off automatically.
EN-5