B-Speech Alpha base Modo De Uso página 11

Alpha_Base.qxp 06.11.2007 15:58 Seite 11
GB
Phone Book reading
Select "Reading of the directory" in the main menu and confirm with OK (1). The Alpha Base automatically
synchronise with the mobile phone and downloads the data of the phone directory. The names and the num-
bers are stored alphabetically in the memory of the Alpha Base. This function is not supported by all mobile
phones, in this case "phonebook push" appears on the Base's screen. To end this function, or after the rea-
dingof the directory, press the "return" (2) key until the mode of conversation is activated. The Base is in
conversation mode when the name of your mobile telephone and a "car" icon is visible on its screen.
Some mobile phones do not support the automatic transfer of the telephone directory or take a long time or
can only transmit a limited number of contacts. In this case, after having paired the Alpha Base with your
mobile phone (an icon "car" appears on the screen), you can manually transfer the contacts from your mobi-
le phone to the Base . In the mobile phone telephone directory choose the contacts to be transferred (single
contacts, groups of contacts or all contacts). Send the data of the contacts by means of Bluetooth. Choose
"B-Speech-Base" among the installed devices and confirm your choice. All the selected contacts are now
stored directly in the telephone directory of the Base .
Note: In the OPP (sending of Numbers one by one via Bluetooth) Phone book transfer Mode, any time you
start to read the Phone Book, the Hand free function will disconnected. The Base will return to Hand free
Mode after closing the Phone book reading function. You can interrupt the Phone Book reading function at
any time by pressing the Return (2) button.
To browse through the telephone directory
Press on the M (4) key to scroll though the contacts memorised alphabetically.
The key (3) makes it possible to browse through the Alpha Base bet until the initial required appears, then
use the M (4) key until the name of the required contact appears.
11