Uline JUMBO H-1229 Instrucciones De Montaje página 5

OPTIONAL PEGBOARD INSTALLATION INSTRUCTIONS
WARNING! Do not exceed 50 lbs. on any one
given wall in the shed structure.
1. Attach 2 wall anchors no more than 6 inches from
the top of the peg board using provided screws.
(See Figure 1)
Figure 1
2. Ensure the anchors are the same distance apart as
the wall slots in the shed. (See Figure 2)
OPTIONAL ADJUSTABLE SHELF INSTALLATION INSTRUCTIONS
1. Attach 2 wall anchors
to each shelf upright
22¹⁄" apart using
provided screws.
(See Figure 1)
2. Slide the wall anchors
on the shelf uprights
into wall slots on the
shed. (See Figure 2)
Figure 2
1
2
PAGE 5 OF 15
Figure 1
22½"
1-800-295-5510
3. Attach 2 more wall anchors to the pegboard
vertically in line with and 22" below the top anchors
using provided screws. (See Figure 2)
4. Hang the peg board by sliding the wall anchors into
the wall slots on the shed. (See Figure 2)
Figure 2
1
2
3. Insert shelf supports in the desired locations on
the shelf uprights and lay shelf into position.
(See Figure 3)
Figure 3
uline.com
Shelf Supports
0421 IH-1229