Petzl SEQUOÏA SRT Manual Del Usuario página 2

1
Only the
techniques
shown in the
diagrams that
Belt for restraint and work positioning EN 358: 2000
are not crossed
EN 813: 1997 seat harness
out and/or do not
This product must not be loaded beyond its strength rating,
display a skull
nor be used for any purpose other than that for which it is
and crossbones
designed.
symbol are
WARNING
authorized.
Activities involving the use of this equipment are inherently
Check our Web
dangerous.
site www.petzl.
You are responsible for your own actions and decisions.
com regularly
Before using this equipment, you must:
to fi nd the latest
- Read and understand all instructions for use.
versions of these
- Get specifi c training in its proper use.
documents.
- Become acquainted with its capabilities and limitations.
Contact PETZL
- Understand and accept the risks involved.
if you have any
Failure to heed any of these warnings may result in severe
doubt or diffi culty
injury or death.
understanding
these documents.
Responsibility
WARNING, specifi c training is essential before use.
This product must only be used by competent and responsible
persons, or those placed under the direct and visual control of a
competent and responsible person.
Gaining an adequate apprenticeship in appropriate techniques
and methods of protection is your own responsibility.
You personally assume all risks and responsibilities for all
damage, injury or death which may occur during or following
incorrect use of our products in any manner whatsoever. If you
are not able, or not in a position to assume this responsibility
or to take this risk, do not use this equipment.
3
Before each use
Check the webbing at the attachment
points, at the adjustment buckles and at
the safety stitching.
Look for cuts in the webbing, wear
and damage due to use, to heat, and
to contact with chemical products, etc.
Be particularly careful to check for cut
threads.
Verify that the DoubleBack and FAST
buckles operate properly.
Verify the GATED RINGS: body, spacer,
screw securely tightened.
During each use
It is important to regularly inspect the
condition of the product. Check its
connections with the other equipment in
the system and make sure that the various
pieces of equipment in the system are
correctly positioned with respect to each
other.
Consult the details of the inspection
procedure to be carried out for each item
of PPE on the Web at www.petzl.com/ppe
or on the PETZL PPE CD-ROM. Contact
a PETZL distributor if there is any doubt
about the condition of this product.
2
C69AFO SEQUOIA SRT C695010D (010710)
Field of application
Inspection,
points to verify
2
Nomenclature of parts
1
3
4
10
8
3 bis
2
4
Compatibility
Verify the compatibility of this product with the other
components of your equipment (compatibility = good
interaction when used together).
Compatibility between Attachment point and Connectors
An incompatible connection can cause accidental
disconnection, breakage, or affect the safety function of
another piece of equipment.
WARNING, the attachment points of your harness can act as
a lever on the gate of a connector. When a sudden tension
comes onto the rope and/or an external pressure on the
locking system, and the connector is poorly positioned, the
locking sleeve can break and the gate can open itself.
To reduce this risk:
1. Verify that the gate is securely closed and locked by
pressing it with your hand.
2. Check that your connectors are properly positioned each
time the system is loaded (lanyard, descender, etc.).
3. Make sure your connectors are compatible with the
attachment points (shape, size, etc.). Do not use any
connectors that have a tendency to stay in an incorrect
position.
Any equipment attached to your harness (anchors, locking
connectors, absorbers etc) must conform to EN standards.
For your safety, get into the habit of always making your safety
systems redundant.
Contact a Petzl distributor if you are uncertain about the
compatibility of your equipment.
(1) Belt,
5
(2) Leg loops,
6
(3) DoubleBack adjustment
9
buckles,
(3 bis) FAST rapid buckles,
(4) «D» lateral attachment
points,
(5) Ventral attachment
point,
(6) Attachment bridge,
(7) Attachment bridge
height-adjustment straps,
(8) Gated rings,
(9) Strap retainer,
(10) Saw holder,
(11) Equipment loops,
(12) Adjustable elastics,
13
(13) Rear chest harness
attachment buckle,
14
(14) Tool-carrier retainer.
11
Principal materials
Polyester, nylon, PVC,
steel (adjustment buckles),
aluminum alloy (attachment
points).
12