Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING TRANSMITTER:
A. H, M and L buttons: (Fig. 2)
These three buttons are used to set the fan speed as follows:
H= high speed
M= medium speed
L= low speed
B.
button:
This button turns the fan off.
C. The "
" button:
The "
" button turns the light ON or OFF and also controls
the brightness setting. Press and hold the button to dim and brighten
the light. Press and hold the button and release the button at desired
brightness. The light key has an auto-resume, it will stay at the same
brightness as the last time it was turned off.
D. The "
" button is used to set the fan forward or reverse, press
the button forward (for warm weather) or reverse (for cool weather).
NOTE: To operate the reverse function on this fan, press the reverse
button while the fan is running.
E. "
,
and
" buttons:
Pressing the timer buttons will automatically turn fan off after 2, 4,
or 8 hours.
Please note that the timer buttons is active only when the fan speeds
turn on. the light is not included.
You can cancel the timer by pressing
speed.
NOTE: The distance between the transmitter and receiver should
not be greater than 30 feet. For best performance, make sure the
Black Antenna on the end of the receiver unit remains extended and
not tangled with any of the electrical wires.
For Warranty Information please visit www.hinkley.com
button and re-start the fan
Fig. 2
Publicidad
