Care And Cleaning - Kenwood TTP102 Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
All manuals and user guides at all-guides.com
key
crumb tray
lever (with 'Hi-Rise™' for extra lift)
cancel button with indicator light
defrost button with indicator light
reheat button with indicator light
browning control
cord storage
to use your toaster
1 Move the browing control to the
desired setting. Use a low setting
for light toasting and for thin or dry
bread.
2 Insert the bread, muffins, bagels etc.
3 Lower the lever
until it locks. (The
lever will not stay down unless the
toaster is plugged in). The cancel
button will illuminate.
To toast frozen bread, once the
bread is lowered press the 'defrost'
button, its light will come on.
To warm toast that's popped up but
gone cold, lower the toast then
press the 'reheat' button. Its light will
come on.
To stop toasting at any stage, press
the 'cancel' button. Never lift the
lever to cancel toasting.
4 Your toast will pop up automatically.
To raise it higher, lift the lever.
hints on using your
toaster
Select a lower setting for light
browning, for toasting one slice only
or for dry bread.
When toasting a single slice of
bread, you may notice a variation in
toast colour from one side to the
other - this is normal.
Dry/stale bread toasts more quickly
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
In order to achieve uniform browning
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.

care and cleaning

1 Before cleaning, unplug your toaster
and let it cool down.
2 Slide out the crumb tray
then replace. Do this regularly:
crumbs can smoke or even burn.
3 Wipe the outside of the toaster with
a damp cloth, then dry.
service
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your toaster or
servicing or repairs
Contact the shop where you bought
your toaster.
3
. Clean,

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ttp103

Tabla de contenido