Quick Connect - Uline H-8082 Manual De Instrucciones

QUICK CONNECT

1. Remove red cap from outlet as shown.
(See Figure 3)
2. Screw on quick connect found in accessory bag.
Tighten with 1" wrench. (See Figure 4)
PAGE 2 OF 6
QUICK ASSEMBLY GUIDE CONTINUED
Figure 3
Figure 4
1-800-295-5510
uline.com
GUN/HOSE ASSEMBLY
1. Screw gun and hose threads together by hand –
turning clockwise until hand-tight. Hose threads
already have pipe-sealing tape applied to them.
(See Figure 5)
2. Use 3/4" wrench on the hose fitting. Use a 7/8" wrench
on the gun fitting. Tighten clockwise until snug.
(See Figure 6)
3. Gun/Hose assembly is ready for use.
Figure 5
Figure 6
1020 IH-8082