Cameo FLAT PRO 7 G2 Manual De Usuario página 13

MAIN DISPLAY STANDALONE MODE
The display shows the currently activated standalone mode
(Mode Auto, Mode Static, Mode CCT, Mode Color Preset, Mode User Color, Mode Loop).
MAIN DISPLAY SLAVE MODE
The display shows Mode Slave. If the slave unit is assigned to a slave group, the slave group and
the delay time set in the master unit under the standalone operating modes Auto and Loop are
also displayed.
CONFIGURE DMX START ADDRESS
Press MENU to access the main menu. Now use UP and DOWN to select the menu item DMX
Mode and confirm with ENTER. Again use UP and DOWN to select the desired DMX mode and
confirm with ENTER (DMX modes with DMX delay channel are identified with ‚D'). Tables with the
channel assignment of the different DMX modes can be found in these instructions under DMX
CONTROL.
CONFIGURE DMX MODE
Press MENU to access the main menu. Now use UP and DOWN to select the menu item DMX
Mode and confirm with ENTER. Again use UP and DOWN to select the desired DMX mode and
confirm with ENTER. Tables with the channel assignment of the different DMX modes can be
found in these instructions under DMX CONTROL.
13