Sony VPL-CS10 Manual De Instrucciones página 10

qd Security lock
qd
qd qd
Connects to an optional security cable
(Kensington's).
The security lock corresponds to
Kensington's MicroSaver Security
System.
If you have any comment, contact:
Kensington
2853 Campus Drive
San Mates, CA 94403
U.S.A.
Tel: 800-535-4242: extension
3348
Home page address:
http://www.kensington.com/
qf Ventillation holes (intake,
qf qf qf
bottom)
qg Lamp cover (bottom)
qg qg qg
qh RELEASE (adjuster adjustment)
qh
qh qh
button
For details, see "How to use the
adjuster" on page 10.
qj Carrying handle
qj
qj qj
Pull up the handle from the projector for
carrying.
qk Ventilation holes (intake, rear)
qk
qk qk
10
GB
Location and Function of Controls
How to use the adjuster
To adjust the height
Adjust the height of the projector as follows:
1
Lift the projector and press the
RELEASE button.
The adjuster will extend from the
projector.
RELEASE button
2
While pressing the button, lower the
projector. Then, release the button.
For fine adjustment, turn the adjusters to
the right and the left.
to lower the
projector
Notes
• Do not remove the adjusters from the
projector. Do not use the projector with the
adjusters removed.
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the projector
with the adjusters out.
to raise the
projector