Publicidad
Idiomas disponibles
Idiomas disponibles
Bluetooth
Hands free
®
User Manual
Congratulations
Congratulations on your purchase of the B-Speech
device allows you to communicate wirelessly through your mobile phone and inclu-
des a built-in microphone and loudspeaker. It uses BT 3.0 and multilink technology,
but is also compatible with mobile phones using older versions. Your B-Speech
Prim handsfree uses a built-in Lithium-Ion rechargeable battery, with long life.
Package contents:
• Handsfree „B-Speech
Prim"
®
• Fixing clip
• Car charger
• Lithium-Ion Battery
1
• This manual
2
Function overview
1. Microphone
3
2. Mulitfunction key
3. Volume -
4
4. Volume +
5. Status LED
5
6. Microphone mute
6
7. Speaker
8. Fixing clip
9. Charging port
7
10. Battery case
Insert and charge battery
Before you can use the hands-free set, you must place the batteries into the device
and charge it fully. The batteries have been included in the package.
Putting in the batteries
1. Following the direction of the arrow, pull out the cover of the battery compartment
so that the battery compartment is exposed.
2. Place the batteries into the compartment, making sure that the batteries are
inserted correctly.
3. Close the battery compartment.
1.
2.
Charging the battery
1. Plug the cable into a suitable electrical socket.
2. Plug the USB cable into the hands-free set.
3. When charging, the red LED will light up. When charging is complete, the red
LED goes out. You can separate the handsfree set from the cable after the red
LED goes off.
4. If the red LED blinks while the device is in use, the device has to be charged.
5. The charging time is about 3 hours.
Switching the handsfree on or off
To switch on:
Press and hold the multi-function key (2) for 3-7 seconds until the blue LED comes on.
To switch off:
Press and hold the multi-function key (2) for 3 seconds until the red LED flashes.
Note, if there is no connection with handsfree Prim, the handsfree will switch off
automatically. After switching on , Prim will go into auto-pairing mode and
connect to the mobiles, which were paired before.
Pairing
Your B-Speech
Prim needs to be paired to your Bluetooth
®
it can be used. This is a two part process; one part is carried out on the handsfree
and the other is carried out on the mobile phone.
Note that different mobile phones use different methods of pairing.
To pair your Prim with an mobile phone:
1. With your handsfree turned off, press and hold the multifunction key (2) for 3-7
sec. Hold the key until the blue/red LED will flash alternatively. This indicates that
the B-Speech
prim is set in pairing mode.
®
2. Use your phone's menu to search for Bluetooth
should indicate it has found the B-Speech
to pair your mobile phone and handsfree together. If you are unsure how to go
through the pairing process on your mobile phone, please refer to the user manual.
3. When asked for a pin key, enter: „0000". Your phone will confirm that pairing has
been successful.
Technische Änderungen vorbehalten! / Technical specifications are subject to change without notice. 01_2015
Prim multilink-handsfree. This
®
®
10
3.
mobile phone before
®
audio devices. The phone
®
Prim headset. Confirm that you want
®
Note: that there is usually a time limit to pair devices.
Note for Multi-link use:
In order to pair a second mobile please press the volume - button (3) for 3 seconds,
the LED will alternate rapidly between blue and red, B-Speech
ring Mode and you can pair the second mobile. Please proceed with pairing as descri-
bed before.Switch your handsfree off and on as described before. The two latest
paired mobile phones will be connected automatically.
Phone call use
Making a call from the mobile phone
While your mobile phone is paired with your handsfree, you can use the mobile phone
to make phone calls in the same way as normal. The only difference will be that the
speaker and microphone functions of the handsfree will be used instead of the phone's.
Answering a call
To answer a call after a ring tone heard from your handsfree, simply press the multi-
function key.(2).
Note that you can set your mobile phone to automatically answer calls, which means
8
you do not even need to press the multi-function key. Please refer to your mobile
phone's user guide for more information about this setting.
Note for Multi-link use:
In Multi-link mode you can hold a running conversation to accept an incoming call
9
from the second mobile phone and switch between those two phone calls.
During an running conversation with the first mobile phone, press the mute key (6) to
hold the first and accept the second mobile phones call.
The conversation of the first mobile phone will be set to hold. To switch between both
calls, press the mute key (6) again. After the active call is ended, the hands-free set
will automatically switch to the second running call.
Ending a call
During a call, press the multifunction key (2) to hang up. If the other person hangs up
first, then the call will end automatically.
Voice dialling
In order to use the voice dial feature of your handsfree, your phone must support
voice dialling and must have voice tags stored. To use voice dialling, the correspon-
ding voice profiles must be stored in your Phone Your Mobile must also support this
function. Press the multifunction key (2) briefly. You will hear a short tone. Speak the
voice tag immediately. Your phone will make the call.
Last number redial
When the headset is in standby mode (not in conversation), press the volume + key (4)
3 seconds, (tone appear) and your phone will re-dial the last number that you called.
Note: This function only works on Bluetooth® phones that support the Hands-free
profile In the multi-link mode, the number is either the number of the last paired or the
last used mobile.
Transfering a single call
During a call, you can press press and hold the multifunction key (2), to switch
the conversation between the hands-free and the mobile phone. Press and hold the
multifunction key (2) again to return.
Note: Please note that your mobile phone have to support this function.
If your mobile phone does not support it please use it to transfer the call back to your
hands-free.
Rejecting Calls
Press the multifunction key (2) for 3 seconds during an incoming phone call to reject
the call.
Microphone Mute
While talking using the hands-free, press and hold the Microphone mute key (6) for
about 3 seconds to mute the microphone. Press and hold the Microphone mute key
(6) again to activate the hands-free microphone.
Adjusting the volume
• To increase the volume, briefly press the increase volume key (4).
• To decrease the volume, briefly press the decrease volume key (3).
Technical specification
• BT Version 3.0 / Class 2 / working range 10 m
• Supports Headset, Handsfree and A2DP profile
• Multilink, 2 mobile phones can be used simultaneously
• 1,5 Watt speaker
• DSP
• Battery Type: Rechargeable Lithium-Ion Battery, 750 mAh
• Talk time: Up to 6 hrs / Standby time: Up to 600 hrs
• Charging time: 3 hrs
• Weight: 65 g
GB
Prim will go into pai-
®
Publicidad
