Playing CDs
Inserting a CD
NOTE
►
It is not possible to guarantee playback for every self-burned CD-R or CD-
RW. If the burned CD-R or CD-RW does not play, this does not indicate that
the device is faulty.
♦
Press the
When switched on for the first time, the device automatically starts in CD
mode.
♦
If the device is already switched on, but is not yet in CD mode, press the
/SOURCE button
♦
Open the CD compartment
To help you, there is a small indentation
compartment
CD compartment lid
♦
Place the CD, with the printed side facing up, onto the tray spindle and
press it on gently until it clicks into place.
♦
Close the CD compartment
first shows "----" and then shortly afterwards CD playback starts with the
first track on the CD.
NOTE
►
If "NO" or "Err" appears on the display
possible that you have inserted a data CD rather than a music CD. "NO"
also appears on the display
if the CD is inserted the wrong way round.
Standard functions
Function
Start
Pause
Stop
Next track
Previous track
GB │ IE
■
44
│
/SOURCE button
briefly until "Cd" appears on the display
by lifting the lid carefully with your fingers.
. "OPEN" now appears on the display
is opened.
by pressing the lid gently down. The display
if there is no CD in the CD compartment or
in CD mode
Press the ►/II/SCAN/AMS button
Press the ►/II/SCAN/AMS button
(the number of the track currently playing flashes on the
display
)
Press the ■ ST/MONO button
First press the −VOL+/ І◄◄ TUNE ►►І dial
turn it to the right until the required track is played.
First press the −VOL+/ І◄◄ TUNE ►►І dial
turn it to the left until the required track is played.
, if necessary, to switch on the device.
at the front right side of the CD
after inserting the CD, then it is
during playback
.
as soon as the
during playback
and then
and then
SCUR 3 A1