Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

π S-19486
BATTERY ACID
SPILL KIT
HOW TO USE KOLOR-SAFE
NEUTRALIZERS:
1.
Evacuate employees from the spill area.
2. Wear personal protective equipment compatible
with chemicals involved.
3. Ventilate the contaminated area.
4. Contain the spill with universal sorbent material.
5. For best results place universal sorbent pads on the
spill to soak it up.
6. Slowly spray or pour the acid neutralizer on the
contained spilled acid.
CAUTION! Some HEAT or GASSING OUT may be
generated.
7. The color change indicator changes from PURPLE to
YELLOW during neutralization.
8. Apply liquid acid neutralizer until the color change
indicator turns a reddish color.
9. Allow neutralized liquid to cool.
10. Soak up remaining neutralized liquid with sorbent
materials.
11. Place used sorbents into temporary disposal
containers.
12. Wipe up residue with non-woven cloth material.
13. Dispose of all used articles (sorbents, neutralized
liquids, etc.) according to local, state and federal
regulations.
NOTE: Depending on the extent of the cleanup
process, additional equipment may be
required.
PAGE 1 OF 3
1-800-295-5510
uline.com
INSTRUCTIONS
LIQUID ACID
®
HOW TO USE AQUALOCKIT
1.
Evacuate employees from the spill area, if necessary.
2. Wear personal protective equipment compatible
with chemicals involved.
3. Ventilate the contaminated area.
4. Determine if the contaminated water, sludge,
neutralized acids or bases, etc., are pH neutral
(pH 6-7).
NOTE: See steps 7 and 8 of the KOLOR-SAFE
instructions to neutralize acids. The color
change indicator will turn a reddish color to
signify a neutral pH.
5. Sprinkle some of the AQUALOCKIT
spill.
6. Allow the AQUALOCKIT
liquid.
7.
Collect the used AQUALOCKIT
vacuuming, shoveling, etc.
8. Place the used AQUALOCKIT
disposal device.
9. Dispose of all used articles according to local, state,
and federal regulations.
CAUTION! It is strongly recommended that
KOLOR-SAFE
Dry or Liquid Neutralizer be
®
used to neutralize the spill prior to use of
AQUALOCKIT
for maximum performance.
®
NOTE: ABSORBS UP TO 1 GALLON PER KIT.
Para Español, vea página 2.
Pour le français, consulter la page 3.
:
®
onto the neutral
®
to absorb the pH neutral
®
by sweeping,
®
into a temporary
®
0521 IS-19486
®

Publicidad

loading

Resumen de contenidos para Uline S-19486

  • Página 1 Para Español, vea página 2. Pour le français, consulter la page 3. π S-19486 1-800-295-5510 uline.com BATTERY ACID SPILL KIT INSTRUCTIONS HOW TO USE KOLOR-SAFE LIQUID ACID HOW TO USE AQUALOCKIT ® ® NEUTRALIZERS: Evacuate employees from the spill area, if necessary.
  • Página 2 π S-19486 800-295-5510 uline.mx KIT PARA DERRAMES DE ÁCIDO DE BATERÍA INSTRUCCIONES CÓMO USAR LOS NEUTRALIZANTES DE ÁCIDO CÓMO USAR AQUALOCKIT ® LÍQUIDO KOLOR-SAFE ® Evacúe a los empleados de la zona donde se haya producido el derrame, en caso de ser necesario.
  • Página 3 π S-19486 1-800-295-5510 uline.ca ENSEMBLE EN CAS DE DÉVERSEMENT D' A CIDE SULFURIQUE INSTRUCTIONS COMMENT UTILISER LES NEUTRALISANTS D' A CIDE COMMENT UTILISER AQUALOCKIT  : ® KOLOR-SAFE  : ® Évacuez les employés de la zone de déversement, le cas échéant.