How To Attach The Stand; How To Remove The Stand - Hitachi LE32V407 El Manual Del Propietario

How to attach the stand

NOTE:
• Assure the AC cord is not connected to an AC outlet.
• Before beginning this process, make sure that you have a clean, safe, and cushioned space to work at to avoid any damage to the
unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
1
Carefully place the TV screen face-down on a clean, cushioned surface.
2
Insert and secure the stand with 1 screw (supplied) (M4x10mm) as shown in Figure 1.
• Be sure to follow the above instructions. Insufficient tightening or incorrect installation of the stand will not support your TV correctly,
and could result in damage or injury from tip-over.

How to remove the stand

When you transport this product, remove the stand and pack it flat against the back of the unit in the carton. To remove the stand,
perform the above steps in reverse order.
When you mount the TV on the wall, remove the stand. To disconnect the base/stand remove the screws from the back as shown below.
NOTE:
• Before wall-mounting, please carefully check the location of the TV's mounting-holes.
All manuals and user guides at all-guides.com
Figure 1
Screws
7 EN