Panasonic ES2235 Manual Del Usuario página 3

ES2235EU̲01 05.1.8 15:22 ページ 4
Before use
This Ladies Wet/Dry Shaver can be
used for wet shaving with shaving
lather or for dry shaving. You can
use this watertight shaver in the
shower and clean it in water. Our
research has shown that you can
enjoy closer and smoother shaves
using warm water and shaving
lather. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. And our pop-
up trimmer will be able to cut longer
hairs with ease.
Cleaning is so simple. Just rinse
out the shaving head under the tap
or shower. No mess, no fuss!
Parts identification
(Fig. 1)
A Protective cap
F
Pop-up trimmer
B
F
Outer foil
C
F
D Outer foil frame
F
E Pop-up trimmer switch
F
F Inner blade
F
G Foil frame release button
F
H Lock button
F
I Switch
F
J Battery cover
F
K Cleaning brush
F
Replacing batteries
Before replacing the batteries, wipe
the shaver free of moisture to
prevent the inside from getting wet.
When the blade speed decreases,
this indicates that the batteries
should be replaced with new ones.
Do not use this shaver with weak
All manuals and user guides at all-guides.com
batteries.
Remove the battery cover, and
insert the two AAA (LR03) alkaline
batteries observing the (+) and (–)
positions indicated inside the
battery compartment. (Fig. 2)
Do not use a new battery with an
old battery. Also, do not use
rechargeable batteries.
Remove the batteries when not
using the shaver for a long time.
Using your shaver
• Remove the protective cap, then
keep pressing the lock button
and slide the switch up to operate.
• Hold the shaver blade flat against
the skin. Hold the shaver blade so
that it is gently in contact with the
skin.
• Slowly move the shaver against
the direction of hair growth.
• Use the pop-up trimmer to cut
long hairs.
• Gently hold the blade in contact
with the skin and move slowly.
• Underarm: Lift the arm to stretch
the skin and shave in various
directions. (Fig. 3)
• Legs: Shave from ankles to
knees. (Fig. 4)
• Arms: Shave from outside to
inside. (Fig. 5)
• Bikini: Use the trimmer for the
bikini line. Pop up the trimmer and
cut excess hair along the desired
bikini line. (Fig. 6)
Maintenance
Cleaning with the brush
• Remove the frame while pressing
4
both foil frame release buttons.
(Fig. 7)
• Remove the inner blade by pulling
it straight out and clean with the
brush. (Fig. 8)
Washing with water (Fig. 9)
• Remove the frame.
• Wash in cold or warm water.
• Attach the frame and wipe off all
water. Dry the shaver, and then
attach the cap.
Replacing shaving head
components
H
F
It is recommended that you replace
the outer foil at least every year and
the inner blade at least every two
years to maintain your shaver's
cutting performance.
Replacing the outer foil
Press the foil frame release buttons
to remove the outer foil frame.
Then, squeeze the front and the
back side of the foil frame and lift
up one of the two knobs on the
outer foil. (Fig. 10)
Inserting the new outer foil
Slip the foil into the frame and
guide the plastic edges onto the
hooks in the foil frame until it clicks
into place. (Fig. 11)
Replacing the inner blade
Squeeze the foil frame release
buttons and lift the outer foil frame
upward to remove it. Remove the
inner blade by grasping it firmly at
both ends and pulling straight away
from the shaver. To insert the new
inner blade, hold the blade at both
ends and press downward until it
snaps into place.
Caution
• Do not leave the appliance in
places where it will be exposed to
high temperature or direct contact
with sunlight.
• Do not leave the shaver in direct
sunlight to dry with the outer foil
removed.
• The outer foil is very thin. If
handled improperly, it can be
easily damaged. To avoid personal
injury, do not use the shaver if it
has a damaged foil or inner blade.
• Wash the shaver with tap water.
Do not use salt water or boiling
water. Do not submerge the
shaver in the water for a long time.
• Do not wipe any part of the shaver
with thinner, benzine or alcohol.
Clean it by using a cloth dampened
with soapy water.
• Do not take the housing apart as
this can affect the watertight
construction.
• If the shaver is not used for a long
time, remove the batteries to
prevent possible leakage.
• If the shaver is not working
properly, have it inspected at the
place of purchase or an authorized
service center.
• Always use your shaver for its
intended use, as described in this
manual.
5