Oki LP470 Guia De Inicio Rapido

Installation Instructions
Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Bloc-pile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pila . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Bateria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Cautions
• Never try to take apart the battery pack or
modify it in any way.
• Never expose the battery to direct heat or fire, or
take any actions that may lead to physical
damage.
• When charging the battery pack, be sure to use
the printer or the specified battery charger.
• Use only specified replacement battery packs.
• Dispose of the battery in accordance with local
regulatons. Do not place the battery pack
together with other batteries such as dry
batteries.
WARNING Do not use wet hands to replace the
battery pack. Doing so increases the
risk of electric shock.
Removing the Used Battery Pack
Important! Remove the battery pack only when the
printer is turned off. Do not remove the
battery while the STATUS LED is on.
Otherwise, the information stored in
the printer may not be updated.
1. Press the POWER button to turn the printer off.
P O W
E R
P R
2. Turn the printer upside down and open the
battery cover.
IN T
F E
E D
3. Push aside the gray latch (1) in the
compartment and pull out the battery (2).
Installing the New Battery Pack
Caution: Make sure to install the pack in the
correct direction to avoid the danger of
injury or damage to surrounding areas.
1. Align the battery pack so that its metal terminals
(1) are facing the printer and the tab (2) on the
battery is up, then insert the battery until it snaps
in place.
2. Close the battery cover and turn the printer on.
English