Step 2 - Front Wheel Assembly; Step 3 Rear Wheel Assembly - GAGGLE Compass 9909032 Manual Del Usuario

Assemble Front Wheel Assembly to
Stroller Frame Assembly.
Align Collar of Front Wheel
Assembly (C) with mounting shaft of
Stroller Frame Assembly (A). Push up
on collar until the Front Wheel
Assembly (C) locks into place with a
click.
See Figure 3.
Note: For possible disassembly there
is a release tab on the bottom inside of
the Front Wheel Assembly collar.
For wheel directional locking option see
the Stroller Operation section.
Assemble Rear Wheel and Brake
Assembly to Stroller Frame Assembly.
Align both collars of Rear Wheel and
Brake Assembly (B) with
mounting shafts of Stroller Frame
Assembly (A). Push up until the Rear
Wheel and Brake Assembly (B) collar
locks into place with a click. The spring
button should fully protrude through
hole in Rear Wheel and Brake
Assembly collar (B)
See Figure 4.
Note: For possible disassembly of rear
Wheel and Brake Assembly, fully
depress spring button to release
assembly.
For wheel brake option see the Stroller
Operation section.
STEP 2 Front Wheel Assembly

STEP 3 Rear Wheel Assembly

C
6
A
AB20076_G4A
Figure 3
AB20076_G5A
Figure 4
A
B