EN
3. Installation and setting-up procedures
Attention! All installation and commissioning work should be carried out by duly qualified and
authorized personnel in accordance with the regulations of the country where this machine is
used.
• Make sure that the mains voltage corresponds to the operating voltage of the machine,
check the installation of protection devices, and make sure that they conform to their power
and characteristics ratings.
• The protection devices should be located in the immediate vicinity of the machine or in the
switchboard if it is directly accessible. The socket should meet safety requirements and have a
reliable earthing connection.
• The electrical wiring should conform to the rated power of the machine.
• Non-conformity may result in fire.
• When transporting the machine, the attachment of parts, electrical connections and moving
mechanisms may become loose, so they should be checked before the machine is started for
the first time.
• Do not allow the cable to be placed between objects and furniture that may exert pressure
and damage the power cable. Do not bend or tangle the cable.
• Do not use household extension cords to connect the machine.
• Improper wiring or malfunctioning plug or socket may result in a fire.
• The machine should be installed on a stable non-slip horizontal base, at a distance of at
least 100 mm from walls, ramps, steps, and other equipment. The machine should not be
installed near wash tanks and sink units or other cooking equipment.
• Before using the product for the first time, remove all packaging materials, booklets, plastic
bags, etc. from its surface.
• Prior to the first use, clean the machine according to Section 6 Maintenance and Care.
• Do not allow personnel who are not familiar with this manual and have not received a
safety briefing to operate the machine, as this may result in injury or death.
• Take measures to protect the machine from rain and moisture.
4. Safety
Attention! Only the persons familiar with the manual and briefed on safety may be allowed to
use this equipment.
• During installation, setup, operation, maintenance, and repair, along with observing the
safety requirements set out in this manual, occupational safety, fire safety, and health
standards should be strictly observed in accordance with the regulations of the country where
this machine is operated.
• Keep the machine out of the reach of children.
21