Setting The Ironing Temperature; Changing The Value Of A Temperature Selection Button; Speed Of Ironer - Miele professional PRI318 Instrucciones De Uso

en - Using the ironer
Temperature selection buttons
The ironer temperature can be set either via the temperature selection buttons (//) or
alternatively via the  or – buttons.
When adjusting the machine from a higher ironing temperature to a lower ironing temperat-
ure, the heater plate must cool down first. In this case, the heater element for the ironer is
switched off. The  red symbol indicates that the current ironer temperature is still too
high. When the  symbol goes out, this indicates that the selected temperature has been
reached.

Setting the ironing temperature

Press the   button on the control panel to access the ironing temperature selection

mode.
The   button will then be highlighted with a bar underneath.
Now press one of the three temperature selection buttons.

(For example,  temperature selection button)
The selected temperature selection button will be highlighted with a bar underneath and
the heater plate heated / cooled to the appropriate temperature.

Changing the value of a temperature selection button

Press the temperature selection button you want to change the value for.

When keeping the button pressed, the bar will light up underneath it and the current tem-
perature value will appear in the display.
Press the  or – button to set the temperature you want to save for that button.

Then press and hold the temperature selection button highlighted with a bar underneath

until it flashes once.
The new temperature value is now saved for that temperature selection button.

Speed of ironer

Iron type Symbol
PRI318:

PRI418/421:

36


Medium speed range


Medium speed range
Speed range
Low speed range
High speed range
Low speed range
High speed range
m Preset value
/
min
1.5–2.4 2.0
2.5–3.4 3.0
3.5–4.6 4.0
1.5–2.9 2.0
3.0–3.9 3.5
4.0–5.4 4.5