Publicidad
Idiomas disponibles
Idiomas disponibles
BEAUT&SHINE
EN
INSTRUCTIONS
Ergonomic design: waterproof and non-slip, comfortable
to touch, safe and reliable to use.
Reload:
USB fast charging design. Turn counterclockwise and
remove the bottom waterproof cover before charging,
then insert the equipped DC charging cable into the
charging port at the bottom of the toothbrush, and
then connect the other end of the charging cable to
a transformer or device with 5V output. Once loaded,
replace the cover on the bottom, turn it to the right and
make sure it is tightly closed so that it is watertight and
maintains waterproofing.
Head placement and replacement.
Place the head at a 45-degree angle and turn it
counterclockwise to align.
To remove the head, turn it to the right and then pull up
Dental cleaning:
1. Moisten the bristles and apply a suitable amount of
toothpaste.
2. Place the bristles on the teeth at a 45-degree angle to
the gum line.
3. Press the switch button to start the sonic electric
toothbrush.
This product has 6 working modes, choose the one that best
suits you based on your sensitivity by pressing the power
button successively to choose the desired working mode.
4. You just need to gently move the bristles to the part
to be cleaned, and the pressure should be within 150g
(very low). Sonic toothbrushes use the high-frequency
vibration of the bristles to clean the oral cavity, so the
pressure required when brushing your teeth is smaller
than that of normal toothbrushes. About 1/8 of the
pressure of normal brushes is sufficient.
5. The dentist recommends that the oral cavity be divided
into four areas. During the brushing process, move the
toothbrush slowly to make sure each area has a cleaning
time of approximately 30 seconds. This machine does not
have a 15-second area reminder function and will stop for
0.5 every 15 seconds. To remind you to change areas to
brush your teeth.
Facial Cleansing:
7
Publicidad
