Publicidad
Idiomas disponibles
Idiomas disponibles
35370
Installation
Dispenser Housing 31501 = 11½" (292)
Dispenser Housing 31498 = 11" (279)*
*Suggested dimension
is 11", but a minimum of
10½" may be used.
Rough-in
Opening
54½"
(1384)
If necessary, shim at
anchor points to prevent
distortion of unit
Dim. "A"
to finished
2
Dim. "A" Key Surface:
floor
Paper towel top of
opening to finished floor
7/12/2012
The dispenser housing is sold separately and is not included
with this stainless steel wall unit. However, the dispenser
housing is required to complete the installation of the wall unit.
4"
(102)
Dispenser Housing
(sold separately)
For Dim. "A"
48" (1219)
45" (1143)
42" (1067)
40" (1016)
P20-195 Rev. B; ECM 12-15-004G Form No. 034016 • 5/12
Use (4) Screws (not included)
and (6) Nylon Thumb Nuts
(included) to mount dispenser
housing and stainless steel
wall unit into the rough-in
opening.
Use (4) Screws (not included)
to mount stainless steel
frame to rough-in opening.
Waste receptacle slides
under splash lip to hold
in place.
Top of Rough
Bottom of Rough
Wall Opening
Wall Opening
65¼" (1657)
10¾" (273)
62¼" (1581)
7¾" (197)
59¼" (1505)
4¾" (121)
57¼" (1454)
2¾" (70)
Installation
Publicidad
